ZKTeco uFace602 Metal Enclosure with Lock & Acrylic Front

Description

A flyover project off the Bawal–Manesar stretch runs three shifts of contract labour through a single site office. Cement dust drifts in every time the door opens, the site engineer keeps a stack of bills near the punch-in terminal, and last month the entire helper crew was swapped out in a single week. The ZKTeco uFace602 biometric attendance machine at the entry hut has to keep working through all of that — every face it fails to read is a wage dispute on Friday. This lockable metal enclosure is built for exactly that environment.

Why a construction site needs more than a wall bracket

The uFace602 was designed for a corporate lobby, not for a place where the air carries grit and the workforce rotates faster than the supervisors can keep up. Dust settles into the speaker grille, sweaty hands smear the screen, and a new hire who has never seen a face terminal will jab buttons until something happens. A metal enclosure with a sealed acrylic front breaks the loop — the device is visible, operable, but no longer touchable in the wrong ways.

The build, in plain language

Cold-rolled mild steel, single-piece chassis, powder-coated matte black so cement splatter wipes off with a damp cloth. The acrylic front is optical-grade — clear over the uFace602 screen and camera, so face recognition still works at full distance and accuracy. A cam-style lock with two keys per unit secures the front panel. Powder-coated finish handles the daily site dust. Made in India by AmpleTrails.

Dimensions designed, not guessed

This metal enclosure is cut for the ZKTeco uFace602 chassis specifically — outline, screen window, camera aperture and port cut-outs all sit at their exact factory positions. Power, LAN and USB reliefs are on the rear, so cabling stays out of sight and you never have to pull the device out to swap a cable. The acrylic front sits flush, no gaps for dust to drift through.

Through power cuts, no missed punches

Below the device cradle is a compartment sized for a 12V Mini UPS. Wire it once and the uFace602 keeps logging through every outage — important on a site where the mains may drop ten times a day and the contractor’s billing is tied to verified attendance hours. The Mini UPS sits inside the metal enclosure, so it’s protected from the same dust and tampering the device is.

Mounting

Four wall-anchor slots on the rear plate take standard 8mm rawl plugs for a brick or block-work wall. The base is flat for desk or counter mounting if you’d rather keep the terminal at the site office reception. Either way the acrylic front faces the user squarely.

At a glance

• Compatible device: ZKTeco uFace602 biometric attendance machine
• Material: Cold-rolled mild steel, powder-coated matte black
• Front panel: Optical-grade acrylic, clear over screen and camera
• Security: Cam-style lock with two keys included
• Power continuity: Internal bay for 12V Mini UPS
• Mounting: Wall (four anchor slots) or desktop
• Origin: Made in India by AmpleTrails
• SKU: ENC-ZKT-UFACE602

What buyers usually ask before ordering

Will this metal enclosure fit my ZKTeco uFace602 exactly?
Yes — every cut-out is mapped to the uFace602 chassis. Screen, camera, fingerprint platen and ports all sit where they should.

Is the ZKTeco uFace602 device included with the enclosure?
No, this listing is for the metal enclosure only. The uFace602 and Mini UPS are sold separately.

Will face recognition still work through the acrylic front?
Yes. The acrylic is optical-grade — the camera reads through it at full range with no measurable accuracy loss.

How many keys come with the lock?
Two keys per unit. Cam-style barrel; replacements available if you need spares for a multi-site rollout.

Can the powder-coated finish handle construction-site dust?
It’s specifically chosen for that. Wipe-clean with a damp cloth, no special chemicals needed; the lockable acrylic front keeps grit out of the device.

Related metal enclosures you might want

• Same enclosure, labelled for eSSL uFace602
• ZKTeco uFace402 metal enclosure
• ZKTeco uFace302 metal enclosure
• All ZKTeco enclosures & machines
• All biometric accessories

Made in India by AmpleTrails. Send a query: [email protected], or call +91 9315441053 / +91 9034757673.