eSSL iFace302 Metal Enclosure with Lock & Acrylic Front

Description

A cold-storage facility outside Sonipat handles seven thousand cartons of frozen meat a day. The staff anteroom — between the chilled bay and the open yard — runs warm-and-then-cold every time a worker steps through. The eSSL iFace302 biometric attendance machine on the anteroom wall gathers a film of condensation every two hours, and on bad humid days the screen actually fogs over for thirty seconds at a time. Bare devices in that environment don’t make it past a year — the moisture creep into ports kills them quietly. This lockable metal enclosure changes the maths.

Why condensation is worse than a single spill

A spill is a one-time event the device can recover from. Condensation is a slow chemistry experiment — moisture gathers, evaporates, leaves a faint mineral trace; days later it does the same. The iFace302’s keypad and ports collect that trace, contacts oxidise, button feel changes. A metal cover with a sealed acrylic front keeps the device in a near-stable micro-environment even when the room outside is cycling. The lock keeps the cold-store hands off the buttons.

The build, in plain language

Cold-rolled mild steel, single-piece chassis, powder-coated matte black. The acrylic front is optical-grade — clear over the iFace302 screen, camera and fingerprint sensor — and doesn’t fog the way bare plastic does at the same humidity. A cam-style lock with two keys per unit secures the front. Made in India by AmpleTrails.

Dimensions designed, not guessed

The metal enclosure is cut for the eSSL iFace302 chassis. Outline, screen window, camera aperture, fingerprint platen cut-out and rear port reliefs all match the device exactly. The acrylic front sits flush — no condensation traps inside the seam.

Through power cuts, no missed punches

The Mini UPS bay sits inside the metal enclosure below the device. A 12V Mini UPS keeps the iFace302 logging through outages — and a cold-storage feeder draws hard, so brief mains transients are routine. With Mini UPS continuity the muster reflects the actual shift, important when night-shift premiums get audited.

Mounting

Four rear wall-anchor slots take 8mm rawl plugs for the typical insulated anteroom wall. The base is flat for counter mounting if the duty supervisor’s desk is in the anteroom. Either way, don’t mount directly opposite the chiller airflow.

At a glance

• Compatible device: eSSL iFace302 biometric attendance machine
• Material: Cold-rolled mild steel, powder-coated matte black
• Front panel: Optical-grade acrylic, clear over screen and sensors
• Security: Cam-style lock with two keys included
• Power continuity: Internal bay for 12V Mini UPS
• Mounting: Wall (four anchor slots) or desktop
• Origin: Made in India by AmpleTrails
• SKU: ENC-ESS-IFACE302

What buyers usually ask before ordering

Will this metal enclosure fit my eSSL iFace302 exactly?
Yes — cut for the iFace302 chassis. Screen, camera, fingerprint platen and ports all sit where they should.

Is the eSSL iFace302 included?
No — the listing is for the metal enclosure only. The iFace302 and Mini UPS are sold separately.

Does the acrylic front fog in humid conditions?
Acrylic is far less prone to condensation than the bare plastic bezel. In extreme conditions a quick wipe clears it; the underlying device stays sealed.

Will the cover handle the temperature swing?
Powder-coated steel and acrylic both tolerate the swing well. Avoid direct airflow from a chiller; cold air on the cover increases condensation cycling.

Is the lock corrosion-resistant in cold-storage humidity?
Cam-style barrels last well in normal Indian humidity. For aggressive cold-storage environments we can supply with a stainless cam barrel — speak to us for bulk orders.

Related metal enclosures you might want

• eSSL uFace302 metal enclosure
• ZKTeco uFace302 metal enclosure
• eSSL X990 metal enclosure
• All eSSL enclosures & machines
• All biometric accessories

Made in India by AmpleTrails. Send a query: [email protected], or call +91 9315441053 / +91 9034757673.