eSSL UR10R-1F 860-960 MHz UHF RFID card reader for parking and vehicle access. 10-metre read range with integrated antenna, RS485 and Wiegand output. Built for Indian campus and parking deployments.
eSSL UR10R-1F — 860–960 MHz UHF RFID Card Reader (10 m Integrated-Antenna Gate)
10 in stock (can be backordered)
Description
A Mysuru engineering college needs UHF readers for the staff parking lot vehicle access — every faculty car carries a UHF windshield tag, the parking boom barrier has to lift before the car reaches it (otherwise the morning queue backs up across the access road), and the campus security team wants the simplest possible installation per gate: one reader unit, one cable run back to the gate-house controller, no separate antenna bracket. The campus IT department also does not want to run multiple cables to one mount point. An integrated-antenna UHF reader — antenna and RF electronics in a single weatherproof unit — keeps the install clean. The eSSL UR10R-1F is built for exactly this. A 10-metre long-range UHF RFID card reader with integrated antenna in a single compact unit, with RS485 and Wiegand output to the access control system.
Why integrators specify the eSSL UR10R-1F
The eSSL UR10R-1F is the long-range UHF RFID card reader integrators specify when the deployment needs vehicle access at a parking gate or campus entry with the simplest possible mount-and-cable story. The integrated antenna means one unit, one cable, one mount point — no separate antenna head connected by coax to a separate reader box, which is the alternative many UHF deployments end up with. 10-metre read range is the sweet spot for boom-barrier installations where vehicles approach at moderate speed. RS485 and Wiegand output give the integrator flexibility — RS485 for the campus management system, Wiegand for the access control panel that drives the boom. LED and buzzer feedback at the unit head confirm tag reads.
RFID technology & read range
The eSSL UR10R-1F operates on 860-960 MHz UHF — the global RAIN RFID frequency band — with a read range of up to 10 metres in clear-air parking conditions. The integrated antenna is tuned for the standard windshield-tag orientation that fleet and campus deployments use, so faculty cars get authenticated on the approach without any tag-orientation gymnastics from the driver. UHF passive tags are battery-free, weather-tolerant, and cheap enough to issue a fresh tag for every faculty car. The 10-metre range drops in heavy rain or with adjacent metal structures; an integrator site survey sets final mount geometry. The UR10R-1F card reader passes the tag EPC to the access control system for credential lookup.
How it integrates with your access controller
The eSSL UR10R-1F RFID reader outputs RS485 and Wiegand simultaneously. RS485 feeds the campus parking management system in real time, where tag EPC and faculty record are cross-referenced. Wiegand feeds the access control panel that drives the boom barrier physically — eSSL, BioMax or third-party Wiegand panels all accept the UR10R-1F stream. The dual-output design means the integrator does not have to choose between management visibility and direct gate control; both happen in parallel. Power is 12V DC drawn from the gate-house power supply over the same cable trunk as the data lines.
Daily operation
The eSSL UR10R-1F mounts on a gate post, parking-lot boom-barrier canopy or wall above the lane with line-of-sight to the approaching vehicle. The integrated antenna and electronics are a single weatherproof unit, which simplifies install and reduces field-failure points — there is no coax connector between antenna and reader to corrode or vibrate loose. LED and buzzer feedback at the unit confirm tag reads. The access controller drives the boom motor based on the Wiegand stream. For a campus parking deployment the UR10R-1F runs unattended; the campus security team only notices it when a windshield tag fails to authenticate, which a quick on-vehicle tag check usually resolves.
At a glance
- Brand+Model: eSSL UR10R-1F
- Frequency: 860-960 MHz UHF (RAIN RFID)
- Card types supported: UHF passive tags (windshield, asset)
- Read range: Up to 10 m
- Communication output: RS485, Wiegand
- Power supply: 12V DC
- Indicators: LED and buzzer feedback
- Security: Tamper detection alarm
- Form factor: Integrated antenna + electronics, single-unit gate reader
- Vendor: eSSL Security
- SKU: UR10R-1F
What integrators usually ask before ordering
Will it work with our existing access controller?
Yes — Wiegand output plugs into any standard access controller; RS485 feeds the management system in parallel.
What’s the read range, and does it work through wallets/lanyards?
Up to 10 metres for UHF passive tags. UHF is for vehicle, asset and parking tags — not human card-tap.
Can it read multiple card types (EM + Mifare)?
No — the UR10R-1F is a UHF-only RFID card reader. For mixed EM + Mifare on the staff door, use the eSSL SA40.
Is it IP-rated for outdoor mounting?
The UR10R-1F is built for outdoor gate / parking installations. Confirm the exact IP rating and any weather-hood guidance with the integrator at site survey.
Does it support encrypted cards?
UHF passive tags use plain EPC reading by default; the UR10R-1F card reader passes the EPC to the access control system for policy enforcement.
Related RFID card readers
- All RFID card readers
- All eSSL attendance & access machines
- All access controllers
- eSSL U10 (10 m UHF, RS485 + Wiegand)
- eSSL U14 UHF (12 m maximum range)
Sold by AmpleTrails. Questions on RFID integration, bulk orders or installation? Email [email protected], or call +91 9315441053 / +91 9034757673.
Reviews
There are no reviews yet.